All You Need To Know About Signal Booster Antennas

If you are regularly experiencing call drops, slow data speed, undelivered text messages, etc., it is probably because of the poor cell reception at your location. There are a lot of reasons for the cell reception to go bad. Among them, distance from the cell tower is the most common one. Whatever the reason may be, the best way to improve the cell reception inside your house is by installing a cell phone booster.

A signal booster is a device capable of increasing the strength of the cell signal to a usable level. The signal booster will receive the cell signal using the outside antenna, amplifies the signals with the amplifier unit, and rebroadcasts the amplified cell signals using the inside antenna.

Keep on reading this article to find out more about the outside and inside antennas of the signal booster system.

Outside Antenna

The outside antenna or the exterior antenna receives the cell signals coming from the cell tower. There are two types of outside antenna; omnidirectional and unidirectional.

Omnidirectional Antenna

This type of outside antenna is used to capture cell signals coming from all directions. It is the best choice for the houses that are surrounded by cell towers and still have poor cell reception due to the obstacles that block the cell signals. All in-vehicle signal boosters use an omnidirectional antenna.

Unidirectional Antenna

This type of outside antenna is more powerful than the omnidirectional antenna. As the name suggests, unidirectional antennas are used to capture cell signals from only one direction. There are two types of unidirectional antennas; yagi antenna and log-periodic antenna.

Yagi antennas are more powerful than omnidirectional antennas and are capable of capturing cell signals coming from a long distance. Log periodic antennas are 10 times more powerful than yagi antennas. This type of antenna is ideal for people living in remote locations.

Inside Antenna

Inside antennas are used for rebroadcasting the boosted cell signals to all the nearby cellular devices. Panel antenna, dome antenna, and whip antenna are the three types of indoor antennas. 

Panel Antennas

These are mainly used for rebroadcasting cell signals to narrow hallways or rooms. They emit the boosted cell signals in a beam pattern. 

Dome Antennas

They are usually mounted on the ceiling of the room. Dome antenna is perfect for rebroadcasting boosted signals in square-shaped rooms and single-story buildings. They can transmit cell signals in all directions.

Whip Antenna

The whip antenna is mainly used in cars because they are ideal for rebroadcasting cell signals in small spaces. Like dome antennas, whip antennas can also broadcast signals in all directions.